How do I show photos on my laptop right after they're taken? Ive seen it done in a fashion shoot with a Macbook and a pro camera. Is it possible with a T3i? Thanks!
Once it's installed, connect your T3i to your laptop and fire up the EOS utility. You'll see an option for 'Camera settings/Remote Shooting'. Select that option and then follow the onscreen instructions for capturing images remotely. After each shot, you should see a fullscreen preview of the image. Hope that helps and happy shooting! :)
If you want to get fancy, buy the Eye-Fi pro card. You can get one at any camera store or online. It's an SD card that has wireless capabilities and a GPS.
You install it on your computer to pair it with your camera. Set your computer to ad-hoc network, put the 8GB card in your camera and shoot. It transmits each photo wirelessly to your laptop in seconds. Works if you keep both devices within 40 feet.
I shot about 100 portraits of my church congregation with it and it worked great.
@mbshutter - Thanks for sharing! The Eye-Fi card is in fact a great solution for transmitting images wirelessly. I've actually paired my Eye-Fi card to an iPad, which works like a giant monitor. I can easily check focus and exposure without having to use the zoom playback function on my camera. One of these days I'll get around to writing up a tutorial. Happy shooting! :)
Hey Moose and CherryPic - I wanted to give you a head's up about one thing.
I tested this functionality out (with a physical cable, not wireless), just to see how it works. Sure enough, works like a charm.
But I found that the files were only saved on the computer and not to the camera's card at all. I'm shooting raw+jpg, so I end up with a jpg and a CR2 on my desktop, but nothing in the camera.
I don't know if there's any sort of internal camera settings to determine or change this, but that's what I discovered in my own testing.
Hi, You were doing a direct transfer by cable so you would be instantaneously writing to your laptop. You get the same effect using the EOS utility software. However, when using Wi-Fi or Eye-fi, the data has to be written to the card before it can be transmitted. PBked
OK, I get it, and it sounds great. What is the cable I use to tether between a Canon 7D and a Macbook Air (2015) 13.3 inch? Thanks. This is a terrific site.
Comments
Once it's installed, connect your T3i to your laptop and fire up the EOS utility. You'll see an option for 'Camera settings/Remote Shooting'. Select that option and then follow the onscreen instructions for capturing images remotely. After each shot, you should see a fullscreen preview of the image. Hope that helps and happy shooting! :)
You install it on your computer to pair it with your camera. Set your computer to ad-hoc network, put the 8GB card in your camera and shoot. It transmits each photo wirelessly to your laptop in seconds. Works if you keep both devices within 40 feet.
I shot about 100 portraits of my church congregation with it and it worked great.
I love the sound of this feature as I think it will really help me build my technical skills.
I tested this functionality out (with a physical cable, not wireless), just to see how it works. Sure enough, works like a charm.
But I found that the files were only saved on the computer and not to the camera's card at all. I'm shooting raw+jpg, so I end up with a jpg and a CR2 on my desktop, but nothing in the camera.
I don't know if there's any sort of internal camera settings to determine or change this, but that's what I discovered in my own testing.
You were doing a direct transfer by cable so you would be instantaneously writing to your laptop. You get the same effect using the EOS utility software. However, when using Wi-Fi or Eye-fi, the data has to be written to the card before it can be transmitted.
PBked
What is the cable I use to tether between a Canon 7D and a Macbook Air (2015) 13.3 inch?
Thanks.
This is a terrific site.